HP xw4200 Service And Technical Reference Manual page 53

Table 3-3 Security Features Overview
Feature
Master Boot Record Security
Ownership Tag
Cable Lock Provision
Padlock loop
Solenoid Hood (Smart Cover)
Lock (Optional)
Hood Sensor (Optional)
Universal Chassis Clamp Lock
(Optional)
Rear Port Controller Cover
NOTE: For more information about Computer Setup, see
Purpose
Can prevent unintentional or malicious
changes to the MBR of the current
bootable disk and provides a means of
recovering the "last known good" MBR.
Displays ownership information, as defined
by the system administrator, during system
startup (protected by setup password).
Prevents entire system theft only. 3mm x
7mm slot at rear of system.
Prevents access panel from being removed.
This loop can also be used to secure the unit
to a fixed object.
Prevents removal of the access panel and all
internal components including optical and
diskette drives. Eliminates the need for a
physical key by enabling password-protected
locking & unlocking by a local or remote user.
This feature is sold with the Hood Sensor.
Notifies a local or remote user when the
chassis access panel has been opened. This
feature is sold with the Solenoid Hood (Smart
Cover) Lock.
The version without a cable discourages
access panel removal and prevents theft of IO
devices. The version with a cable additionally
prevents entire system theft and allows
multiple systems to be secured with a single
cable.
Clips to the back of the workstation and
secures your input-output devices and
prevents any cables at the back of the
workstation from being removed.
"Using Computer Setup (F10)" on page
How it is Established
From the Setup Utilities menu.
From the Setup Utilities menu.
Install a cable lock to secure the
workstation to a fixed object, lock the
access panel and secure internal
components.
Install a padlock.
Install a solenoid lock.
Install an intrusion sensor.
Install a chassis clamp lock.
Install a rear port controller cover.
36.
DESKTOP MANAGEMENT 53