Nameplate; Signs And Symbols Used - Abicor Binzel ABIPLAS 71 HF Operating Instructions Manual

3 Product description
Version
Standard length
Power/air cable connection
Tab. 5

3.2 Nameplate

The plasma cutting torches are marked as follows:
1
Nameplate
Fig. 1
When making enquiries, please note the following information:
Type label on the torch handle, for example, ABIPLAS
welding torch.
The machine torch is identified by a label on the handle tube, for example,
®
ABIPLAS

3.3 Signs and symbols used

The following signs and symbols are used in the operating instructions:
Symbol Description
•

1
EN - 8
Cable assembly
1
Nameplate
CUT 71 HF MT.
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
Step(s) described in the text to be carried out in succession
Direct connector or central connector
6 m (other lengths available on request)
G1/4"
2 ABICOR BINZEL label
®
CUT 71 HF on the manual
BAL.0716.0 • 2022-01-11
®
ABIPLAS CUT HF
2