Identification; Marking; Nameplate - Abicor Binzel iROB 501 Original Operating Instructions

1 Identification

1 Identification
The iROB
welding. The device may be operated only with original spare parts. These operating instructions describe
only the iROB
When used in these operating instructions, the terms "device", "product", and "welding power source"
always refer to the iROB
If the welding power source is equipped with the optional iCOOL 1200 cooling unit, separate operating
instructions are included for this module.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.

1.2 Nameplate

Fig. 1
Fig. 2
EN - 4
® ® ®
501, iROB 401 and iROB 301 welding power sources are used for automated MIG/MAG
® ®
501, iROB 401 and iROB
® ®
501, iROB 401 and iROB
®
iROB 501 nameplate
®
iROB 401 nameplate
®
iROB 501, iROB
®
301 welding power sources.
®
301 welding power sources.
® ®
401, iROB 301