Identification; Marking; Nameplate; Signs And Symbols Used - Abicor Binzel xFUME ADVANCED HP 230V-CSA Operating Instructions Manual

xFUME™ ADVANCED HP 230V – CSA

1 Identification

The xFUME™ ADVANCED HP 230V – CSA fume extraction system is used for extracting fumes generated
during welding, cutting and grinding processes. The device may be operated only with original
ABICOR BINZEL spare parts. These operating instructions describe only the xFUME™ ADVANCED HP
230V – CSA fume extraction system.
When used in these operating instructions, the terms "device", "product", and "fume extraction system"
always refer to the xFUME™ ADVANCED HP 230V – CSA fume extraction system.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.

1.2 Nameplate

Fig. 1
The device is labeled by means of a nameplate on the housing.
► You will need the device type, device number and year of manufacture for inquiries.

1.3 Signs and symbols used

The following signs and symbols are used in the operating instructions:
1
A
Nameplate
Description/Désignation
xFUME™ ADVANCED 230V HP CSA
Serial number/Numéro de série:
138206749
Manufactured date/Date de fabrication:
2022
Operating voltage/Tension de fonctionnement:
Frequency/Fréquence:
Rated current/Courant nominal:
Power consumption/Puissance absorbée:
Max. inlet air pressure/Pression d'air d'entrée max.:
General instructions.
Action(s) to be carried out in succession.
Lists.
Cross-reference symbol refers to detailed, supplementary or further information.
Caption, item description.
1 Identification
ABICOR BINZEL USA, Inc.
650 Medimmune Ct., Suite 110
Frederick, MD 21703, USA
Tel. 001-301-846-4196
230 V
60 Hz
16 A
3.6 kW
6 bar
EN - 3