Nameplate; Signs And Symbols Used; Scope Of Delivery; Transport - Abicor Binzel ABIROD G350 Operating Instructions Manual

Alignment jig

3.2.1 Nameplate

The Alignment jig is labelled with an ID number on the mounting plate.
When making enquiries, please note the following information:
• ID number

3.3 Signs and symbols used

The following signs and symbols are used in the operating instructions:
Symbol Description
•

1

4 Scope of delivery

• Torch-specific Alignment jig
• Adjusting lever
Tab. 5
NOTICE
• The Alignment jig is delivered to match a neck change torch with a clamping and guide body as well
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current
catalogue. Contact details for advice and orders can be found online at www.binzel-abicor.com.

4.1 Transport

Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
Goods-in inspection
In case of complaints
Packaging for returns Where possible, use the original packaging and the original packaging
Tab. 6
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
Step(s) described in the text to be carried out in succession
Scope of delivery
as gauging and setting sleeves and an adaptor.
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
material. If you have any questions concerning the packaging and/or how to
secure an item during shipment, please consult your supplier.
Transport
4 Scope of delivery
• Gauging and setting sleeves
• Operating instructions
EN - 5