Identification; Marking; Nameplate; Signs And Symbols Used - Abicor Binzel iROB 401 AC/DC Original Operating Instructions

1 Identification

1 Identification
The iROB
be operated only with original spare parts. These operating instructions describe the iROB
welding power source only.
When used in these operating instructions, the terms "device", "product", and "welding power source"
always refer to the iROB
If the welding power source is equipped with the optional iCOOL 1200 cooling unit, separate operating
instructions are included for this module.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.

1.2 Nameplate

Fig. 1
The device is labeled by means of a nameplate.
► For inquiries, please have at hand the device type, device number, and year of construction as
indicated on the nameplate.

1.3 Signs and symbols used

The following signs and symbols are used in the operating instructions:
1
A
EN - 4
®
401 AC/DC welding power source is used for automated MIG/MAG welding. The device may
®
401 AC/DC welding power source.
Nameplate
General instructions.
Steps to be carried out in succession.
Lists.
Cross-reference symbol indicating detailed, supplementary, or further information.
Caption, item description.
®
iROB 401 AC/DC
®
401 AC/DC