Table of Contents
Advertisement
2
Technical Data
Standard length
Cooling unit power
Control lead
Weight/meter
Machine-side connection
Tab. 4 Cable assembly
Size
.030" / .035" (0.8 / 0.9 mm)
0.47" / .062" (1.2 / 1.6 mm)
.030" / .062" (0.8 / 1.6 mm)
Tab. 5 Wire feed rolls
*Must use in conjuction with one U-groove drive roll
2.1
Abbreviations
MIG
MAG
MAC
Voltage rating Classification of the insulation resistance, voltage strength
FreedomDrive Hand-held Push-Pull welding MIG gun with integrated
Tab. 6 Abbreviations
2.2
Nameplate
The welding MIG gun system FreedomDrive is identified by a sticker on
the handle side housing. When making any inquiries, please remember
the following information.
• Certificate of conformity, production stamp on the MIG gun, for
example WT440, information on sticker.
4
Metal Inert Gas
Metal Active Gas
Maximum allowable concentration of harmful substances
at the workplace
and protection type
drive and screwable interfaces between assist drive,
cable assembly and MIG gun neck with replaceable tip
adapter
FreedomDrive
20 and 30 feet
min. 1200 W
Multi-wire w/circular connector
approx. 0.7 kg
Euro or Direct
Groove
U
U
Knurled*
Advertisement
Table of Contents
