Resetting The Cpu Module; Executing The Program - Mitsubishi Electric MELSEC iQ-F Series User Manual

14.13

Resetting the CPU Module

Reset the CPU module using the RUN/STOP/RESET switch located on the front of the CPU module.
Procedure
The following illustration is an example of the FX5U CPU module.
(1)
Operate the RUN/STOP/RESET switch with your fingers. Use of a tool such as a screwdriver may damage
the switch.
14.14

Executing the Program

Execute the program written to the programmable controller by using the RUN/STOP/RESET switch.
Procedure
The following illustration is an example of the FX5U CPU module.
(1)
Remote operation
The operation status of the CPU module can be changed externally with the RUN/STOP/RESET switch set to the RUN
position. The operation status of the CPU module can be set to the PAUSE status.
Remote operation can be performed by either of the following methods.
• Using contacts (MELSEC iQ-F FX5 User's Manual (Application))
• Using engineering tools (GX Works3 Operating Manual)
• Using external devices using SLMP (MELSEC iQ-F FX5 User's Manual (SLMP))
14 PROCEDURES BEFORE OPERATION
250
14.13 Resetting the CPU Module
(2)
(2)
1.
Set the RUN/STOP/RESET switch (1) to the RESET
position for a second or longer.
2.
Check that the ERROR LED (2) flashes.
3.
Set the switch back to the STOP position.
1.
Set the RUN/STOP/RESET switch (1) to the RUN
position.
2.
Check that the P.RUN (2) turns on.