Powered Input/Output Module - Mitsubishi Electric MELSEC iQ-F Series User Manual

Powered input/output module

2-4.5 mounting hole
[1]
140 (mounting hole pitch)
With the cover removed
[8]
[7]
[8]
(Unit: mm)
No. Name
[1] Extension connector cover (for
preceding module)
[2] Terminal block cover
[3] POWER LED
[4] Input display LED
[5] Output display LED
[6] Extension connector cover
[7] Extension connector (for preceding
module)
[8] Terminal block mounting screws
[9] Terminal
[10] Extension connector
3 PART NAMES
76
3.2 I/O Module
[2] [3] [4] [5] [6]
W
[9] [8]
[10]
[9] [8]
Description
Cover for protecting the extension connector cover (for preceding module).
Cover for protecting the terminal block.
The cover can be opened for wiring. Keep the cover closed while equipment is running (power is on).
Indicates whether the powered input/output module are powered or not.
On: Powered
Off: Not powered or hardware error
Turns on when input is on.
Turns on when output is on.
Cover for protecting the extension connector.
Connect the extension cable of an extension module to the extension connector under the cover.
Connector for connecting the supplied extension cable that connects to the preceding module (the CPU
module side).
Gradually loosen the left and right screws (alternatingly) to remove the upper part of the terminal block.
Terminals for power, input, and output.
shows a function grounding terminal.
For details on the terminal layout, refer to Page 129 Powered I/O Module.
Connector for connecting the extension cable of an extension module.
8
83