When Rs-232C Cable Is Used - Mitsubishi Electric MELSEC iQ-F Series User Manual

When RS-232C cable is used

Connect a personal computer directly to the CPU module, following the procedure below.
14 PROCEDURES BEFORE OPERATION
242
14.6 Connecting a Personal Computer
Input the CPU IP address or host name in the "PLC side I/F
Detailed Setting of PLC Module" window as shown in the left
figure.
When inputting the host name, set the name specified in the

Microsoft
4.
Double-click "No Specification" (3) on the "Specify
Connection Destination Connection" window to set
"Other Station Setting". Select an item appropriate to the
operating environment.
1.
Connect a personal computer to the CPU module using
the RS-232C cable.
2.
Select [Online]  [Current Connection Destination] on
the menubar of the engineering tool.
3.
On the "Connection Destination Simple Setting
Connection" window, select another connection method
by clicking the [Other Connection Method (Open the
Specify Connection Destination Window)] button.
4.
Click the [CPU Module Direct Coupled Setting] button
(1) on the "Specify Connection Destination Connection"
window.
(1)
(2)

Windows hosts file.
*1