Connect The Cable To The Indoor Unit - Diagram - Sea Breeze SMZ42H46ZOGX Installation Manual

Electrical connection of the indoor unit (wall mounted).
Open the front cover by pressing inward on the sides of the cover near the bottom to release, then pull bottom
of cover outwards.
Feed the cable wire in from the rear of unit.
Open the electric box cover; connect the wires to the terminal strip individually according to the wiring diagram
above. Ensure that the colors of the wires and terminal No. are the same as the wiring diagram. Tighten
terminal screws for safe connections.
DO NOT CONNECT CONDENSATE PUMP TO THE INDOOR UNIT
After wiring, replace the electric box cover, and then close the front panel by pressing the corners inward to
latch.
Note：For detailed information about other types of indoor units, please refer to the manual to be placed with
each indoor unit.
950-0203-revK
Figure 17
DO NOT CROSS WIRES
Connec t ing Cable
Identify each end of the interconnect cable
and each of the conductor using the labels
provided. Units A, B, C, D and E.
Figure 18
- 16 -
Front Panel
Terminal Board
Cable t o be f ed
f rom rear of unit
Elec t ric Box
Cov er
Will vary by Model.
Sc rews
March 1, 2016