Cisco 509G User Manual page 71

Using Advanced Phone Features
Using the Interactive Voice Response Menu on the Cisco SPA 501G
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
Number Option
111 Set a static IP address. Enter the address (use * to enter the "." value),
then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE
disabled, you receive an error message.
121 Set a netmask. Enter the address (use * to enter the "." value), then press
#.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE
disabled, you receive an error message.
131 Set a gateway. Enter the address (use * to enter the "." value), then press
#.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE
disabled, you receive an error message.
161 Set the address of the primary Domain Name Server (DNS). Enter the
address (use * to enter the "." value), then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
181 Set the IP multicast address (used by the Cisco SPA 9000 to
communicate with the IP phone). Enter the address (use * to enter the "."
value), then press #.
To save, press 1. To review the value you entered, press 2. To re-enter,
press 3. To exit, press *.
7932 Enable or disable the web server. Press 1 to enable or 0 to disable, then
press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
723646 Enable or disables access to the administrative (admin) login on the web
interface. Press 1 to enable or 0 to disable, then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
DHCP must be disabled to use this option; if DHCP is not
DHCP must be disabled to use this option; if DHCP is not
DHCP must be disabled to use this option; if DHCP is not
4
64