Using The Corporate Directory - Cisco 509G User Manual

Using Basic Phone Functions
Using the Phone Directories
STEP 3
STEP 4
STEP 5
NOTE
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
NOTE
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
Enter the phone number, including any digits you must dial to access an outside
line and the appropriate area code, if necessary.
(Optional) To change the ring type for the caller:
a. Press the option softkey.
b. Scroll through the available ring types.
c. Press the play softkey to play the selected ring tone or the select softkey to
assign that ringtone to the person whose number you are adding to the
directory.
Press save to save the entry.

Using the Corporate Directory

Depending on your Internet Telephony Service Provider or corporate network
setup, you may not have a corporate directory available to you.
To use the corporate directory:
Press the dir softkey, or press the Setup button and select Directory.
Select Corporate Directory.
Choose and entry and press the dial softkey. Press cancel to exit.
To use the Lightweight Directory Access Protocol (LDAP) directory:
Press the dir softkey, or press the Setup button and select Directories.
Scroll to the LDAP Directory Name and press Select.
The name of the LDAP directory is configured by the phone administrator and can
differ.
3
45