Answering A Call; Ending A Call - Cisco 7912G User Manual

Answering a Call

To answer a call, pick up the handset. See the table below for more options.
If you want to...
Switch from a connected call to
answer a ringing call
Answer a call using call waiting
Retrieve, or allow someone else
to retrieve, a held call on another
phone (such as a phone in a
conference room)
Use your phone to answer a call
that is ringing on another phone

Ending a Call

To end a call, hang up the handset or press EndCall.
If you press End Call, you do not have to put the handset back in
the cradle to end the call.
When the handset in not in the cradle, the off-hook icon will appear
on the screen although there are no active calls.
Business IP Telephony The Future is
Then...
Press Answer. Doing so answers the new
call and automatically places the first call
on hold. See the "Using the Hold Button"
section on page 16 for more information.
you will hear a call waiting tone and see
caller ID information if a new call comes
in while you are on another call. To
answer the call, press Answer.
To return to the original call, use the
Navigation button to select the desired
call and then press the Hold button.
To switch between calls, use the
Navigation button to select the desired
call and then press the Hold button to
resume.
To create a conference call between
yourself and the other two parties, select
the desired calls and press Join.
Use Call Park. See the "Storing and
Retrieving Parked Calls" section on page
21.
Use Call Pickup. See the "Understanding
Shared Lines" section on page 23.
Now
Page 8 of 8