Replacing The Processor - HP Vectra VE6 8 Hardware Manual

NOTE
Removing the
Processor
Vectra VE 8 (Pentium II / Celeron Processor) — Replacing Hardware Components

Replacing the Processor

Replacing the Processor
HP does not support processor upgrades. This information is provided
to help you replace a defective unit with a processor provided by HP
support services.
1 Disconnect the power supply cords and any connection to a
telecommunications network.
2 Remove the PC's cover (page 3).
3 If necessary, remove the power supply unit to improve access to the
processor (minitower models only).
4 Press the two plastic clips towards each other until you hear them
click in place.
5 Carefully pull the processor module away from the slot 1 connector.
Step 5
Step 4
28 English
Step 4