HP Vectra VE6 8 Hardware Manual page 16

Vectra VE 8 (Pentium II / Celeron Processor) — Replacing Hardware Components
Installing a CD-ROM, Tape or Zip Drive in a Front Shelf
5 Unclip the front bezel and gently remove it from the chassis.
Step 3
6 Carefully remove the metal filler plate from the PC chassis. Unlatch
the filler first from one side, and then pull it out. Be very careful not
to hurt your fingers when you do this. You need to use a screwdriver
to help you to unlatch the plate.
7 If the new drive has a tray, attach the drive to the tray. Many devices,
such as the HP Zip drive, require an HP-supplied tray before they can
be installed. CD-ROM drives do not require a tray.
16 English
Step 4
Step 5