HP Vectra VE6 8 Hardware Manual page 27

Vectra VE 8 (Pentium II / Celeron Processor) — Replacing Hardware Components
Step 8b
9 Replace the hard disk drive tray.
a Push the retaining clip downwards and hold it in this position.
b Align the holes located on the top of the hard disk drive tray with
the four clips on the bottom of the floppy disk drive tray. Slide the
hard disk drive forward until it clicks in place
c Release the retaining clip.
10 Attach the connectors to the new floppy drive and the hard disk
drive.
11 Ensure that the data and power cables are neatly routed so that they
do not interfere with any other device nor hinder the PC's cover.
12 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
13 Check the new configuration by viewing the summary screen (press
while the Vectra logo is displayed during system startup).
Step 8a
Step 8b
Replacing the Floppy Drive
English 27