HP Vectra VE6 8 Hardware Manual page 33

Vectra VE 8 (Pentium II / Celeron Processor) — Replacing Hardware Components
Step a
Step b
4 Remove the screws securing the power supply.
5 Slide the power supply unit upwards until it is clear of the PC.
6 Insert the new power supply unit. Secure it in position using the
screws that you removed in step 4.
7 Replacing the Airflow Guide (if required)
a Slide the airflow guide towards the power supply unit, making
sure that the guide passes beneath the key lock.
b Insert the two tabs on the airflow guide into the power supply
unit.
c Using the screw that you removed earlier, secure the airflow
guide to the video card.
Replacing the Power Supply
Slide the airflow guide under
the key lock (if one is fitted)
Retaining screws
that are attached
to the chassis
English 33