Replacing The Processor - HP Compaq Evo D310 Upgrade Manual

Replacing the processor

1 Switch off the PC and remove the PC's cover. Refer to page 10.
2 Locate the processor. It will be covered by a heatsink.
3 Remove the screws from the heatsink and disconnect the processor fan cable..
processor fan connector and
cable
4 Remove the heatsink. (If the processor is stuck to the heatsink, carefully detach the processor from
the heatsink, using a flat tool such as a screwdriver).
5 Lift the processor socket's lever and carefully remove the old processor. Carefully insert the new
processor, then lower the lever back into place.
screws
processor (covered by heatsink)
Upgrading and replacing hardware
screws
Evo D310 Micro Desktop 21