Setup; Choosing And Preparing Site - Life Fitness Arc Trainer Assembly Instructions Manual

Setup

Read the entire manual before setting up the unit.

Choosing and Preparing Site

Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
• Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches (0.6 meters).
• Adjacent units may share the free area.
Free Area - Lower Body
1 23.6", 0.6m
Free Area - Total Body
1 23.6", 0.6m
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance
around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least 30 by 48 inches and
be served by an accessible route for at least one of each type of exercise equipment. If the clear space is enclosed on
three sides (e.g., by walls or the equipment itself), the clear space must be 36 by 48 inches.
All other machines must have a clear floor space of 23" for all access point on the machine.
The dimensions stated in the assembly instructions of this manual include the maximum foot print (in use) dimensions.
Minimum clearance of 12" (30 cm) between units for proper wireless heart rate signal operation.
Page 7 of 47