Life Fitness Arc Trainer Assembly Instructions Manual page 40

Install Right Linkage Rod
1. Pivot right handle assembly up and slide right linkage rod onto right arm.
2. Place a drop of Loctite onto the screw.
3. Install the screw, washer, linkage rod cap, and flange spacer using a 3/16" Allen wrench.
4. Tighten screw to a minimum of 90 in-lbs.
Verify handle assemblies are now installed in the correct position.
Install Contact Heart Rate Cable
1. Connect handle heart rate cable to frame heart rate cable.
2. Press ends of handle heart rate cable into frame.
Item
1 Screw, Socket Head, .250-20 UNC-3A SS
10.2 Nm (90 in. lbs. minimum)
2
3 Washer, Flat, .281 ID x .500 OD x .062"
4
5
6
7
Item
1
2
Item
1
2
Page 38 of 47
Description
Loctite #242
Linkage Rod Cap 2.00 OD
Flange Spacer
Right Arm
Right Linkage Rod
Description
Left Handle Assembly
Right Handle Assembly
Description
Heart Rate Cable, Handle
Heart Rate Cable, Frame
Qty
1
1
1
1
1
1
1
Qty
1
1
Qty.
1
1