Life Fitness Arc Trainer Assembly Instructions Manual page 41

3. Repeat steps to install heart rate cable on opposite handle.
Install Foot Pads
Have one person lift the unit while a second person places a foot pad under each of the two back feet.
NOTE: Foot pads need to be installed to prevent rocking.
Visually Inspect Unit
1. Remove any packing material from unit.
2. Examine the unit to ensure that the assembly is correct and complete.
Level Unit
This procedure will level the unit by evenly adjusting the weight on the rear feet. Leveling the unit will eliminate
rocking during use.
NOTE: References to left and right are from the users perspective during use.
1. Verify foot plates are completely stopped.
2. Grasp one of the rear covers and slowly lift the rear foot off the floor. Lower rear foot to the floor.
Item
1
Item
1
2
3
4
Page 39 of 47
Description
Foot Pads
Description
Rear Cover
Left Rear Foot
Right Rear Foot
Lift Here
Qty
2
Qty.
2
1
1