Drive Belts - Life Fitness Arc Trainer Assembly Instructions Manual

Drive Belts

Remove Front Access Cover
1. Remove screws securing front access cover using a Phillips screwdriver.
2. Remove access cover.
WARNING: Burn hazard.
Do not touch flywheel until cool.
Inspect Drive Belts
There are two drive belts that may become loose, worn or cracked.
Unless the belts have been removed and not replaced properly, it is unlikely the belts will come loose or need to be
re-tensioned.
If a belt has cracks or appears worn, it must be replaced immediately by a qualified service technician.
Primary Belt
The wider of the two belts. It has grooves that keep it aligned on the large upper pulley.
Secondary Belt
The narrower of the two belts. It has grooves that keep it aligned on the flywheel's drive pulley.
Install Access Cover
CAUTION: Do not over tighten screws.
1. Replace and tighten the two upper screws using a Phillips screwdriver.
2. Replace and tighten the two lower screws using a Phillips screwdriver.
1
2
Item
1
2
Page 44 of 47
Description
Screw
Front Access Cover
Description
Primary Drive Belt
Secondary Drive Belt
Qty.
4
1
Qty.
1
1