Life Fitness Arc Trainer Assembly Instructions Manual page 38

Remove Left and Right Handle Assembly
The left and right handle assemblies are shipped in rotated positions. The handle assemblies must be removed and
rotated 180 degrees for proper setup and assembly.
1. Remove a screw and washer from the left handle assembly using two 7/32" Allen wrenches.
2. Slide pivot pin assembly out and remove left handle assembly.
3. Rotate left handle assembly 180 degrees.
4. Apply Loctite to threads inside the pivot pin and screw.
5. Place left handle assembly in position and slide pivot pin assembly back in place.
6. Install the screw and washer to the left handle assembly using two 7/32" Allen wrenches.
Item
1
2
Item
1
2
3
4
5
Page 36 of 47
Description
Left Handle Assembly
Right Handle Assembly
Description
Screw
Washer
Handle Assembly, Left
Pivot Pin Assembly
Loctite #242
Qty
1
1
Qty
1
1
1
1
1