Connecting The Power Cords - HP PL Class 450/500/550/600/650/700/750 User Manual

Monitor Power Connector
WARNING
Setting Up and Using Your HP Visualize Linux Workstation

Connecting the Power Cords

1. Remove any warning labels that may be covering the computer's
power connector on the rear of the computer.
2. Connect the power cords to the display and the computer. (The
connectors are shaped to go in one way only.)
3. Connect the display's power cord and the computer's power cord to
grounded outlets.
For your safety, always connect the equipment to a grounded
wall outlet. Always use a power cord with a properly grounded
plug, such as the one provided with this equipment, or one in
compliance with your national regulations. This Workstation is
disconnected from the power by removing the power cord from
the power outlet. This means the Workstation must be located
close to a power outlet that is easily accessible.
Chapter 1
Connecting the Power Cords
Workstation
Power Connector
Grounded Outlet
9