Installing A Processor - HP PL Class 450/500/550/600/650/700/750 User Manual

NOTE
Fan connection
to system board
HP UltraFlow
Airflow
Guide
How to Install Accessories In Your HP Visualize Linux Workstation

Installing a Processor

Installing a Processor
Some operating systems support a second processor for enhanced
performance. Contact
information.
The Setup program provides an option to disable the second processor.
1. Disconnect the
telecommunications cable.
2. Remove the computer's cover (see page 22).
3. Remove the fan connection to the system board.
Retaining button
4. Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the Workstation's case.
5. Slide out the power supply to improve access to the processor sockets
(see page 26) and carefully place the Workstation on its side.
6. Remove the transparent airflow guide covering the processor sockets.
50
your authorized
computer's power
reseller for up-to-date
cord and any LAN
Chapter 2
or