HP PL Class 450/500/550/600/650/700/750 User Manual page 57

9. Locate the appropriate data cable for the disk drive.
IDE drives should be
connected to a free IDE
connector on the IDE
cables (you can add up
to four IDE devices).
Up to 13 external SCSI
devices can be connected to
the external SCSI connector.
10. Connect the data and power cables to the rear of the device. (The
connectors are shaped to go in one way only.)
Data Cable
11. Slide the power supply back into position, and tighten the four self-
retaining screws (see page 26).
Chapter 2
How to Install Accessories In Your HP Visualize Linux Workstation
Installing Mass Storage Devices
Narrow SCSI devices should be connected
to a free SCSI connector on the SCSI cable
(you can add up to two SCSI devices).
Power Cable
41