Starting Your Hp Visualize Linux Workstation; Stopping Your Hp Visualize Linux Workstation - HP PL Class 450/500/550/600/650/700/750 User Manual

Setting Up and Using Your HP Visualize Linux Workstation
Starting and Stopping Your HP Visualize Linux Workstation
Starting Your HP V Linux Workstation
ISUALIZE
1. Before you start your Workstation, first switch on the display.
2. Start your Workstation by pressing the power button on the front
panel.
When you switch on the computer, it carries out the Power-On-Self-Test
(POST). If you wish to view the POST details, press to get the HP
Summary Screen. If there is an error in the POST, the error will
automatically be displayed. For details, see the section "If a POST Error
Message is Displayed" in the chapter "Troubleshooting Your HP
Visualize Linux Workstation."
If you have set a password in the Workstation's Setup program, the
password prompt displays after the POST has completed. If the
Password prompt is displayed, type your password and press
to be able to use the Workstation.
Stopping Your HP V Linux Workstation
ISUALIZE
To stop the Workstation, make sure that you have exited all programs
and the operating system by running (as Root):
shutdown -h now
and then press the power button on the control panel. If you stop the
workstation without following these instructions, data loss or a
damaged file system may result.
Chapter 1 13