Configuring The Pci Integrated Ethernet Interface; Saving Your Changes And Leaving Setup - HP Vectra XA5 User Manual

3 The HP Setup Program
Configuring Your Network Connection

Configuring the PCI Integrated Ethernet Interface

Configuration of the I/O Address, Hardware Interrupt, and DMA
channel are made automatically for the HP Enhanced PCI Ethernet
interface.
Use SETUP to enable or disable the Enhanced PCI Ethernet interface.
To disable/enable the Enhanced PCI Ethernet interface:
1 Use the or
2 Press to highlight the line
and press
3 Press or
interface.
Enable or disable the interface as required.

Saving Your Changes and Leaving SETUP

When you have made all your changes, you must save them and exit
SETUP.
To save changes and exit SETUP:
1 Press twice to enter the
2 Select
Save changes and Exit
SETUP.
The PC will automatically restart. If you set a User Password, the PC
will display the power-on prompt. Enter the User Password to use the
PC.
You have now completed the setting up procedure. You are now
ready to install the LAN drivers.
62 English
key to select the
Integrated Network Interface
to select the submenu.
to disable or enable the integrated Ethernet
menu.
Exit
to save your changes and exit
menu.
Configuration