Advertisement
Step-15
Push out cover lock from
base slot.
Remove detector cover
Step-16
Install jumpers on Ind plug and Mem
plug depending on selected operating
mode.
Step-17
Install detector cover on its
place (until the click)
Step-18
If during alarm system testing in the initial operation period
(1-2 weeks) there are generated false "Alarm" notifications
connected with peculiarities of the secured room, one
should remove jumper from Sens plug.
8.5
To provide fail-safe operation of alarm system it is
recommended to carry out testing and maintenance of the
detector at least 1 time per month.
Testing should be carried out as follows:
- Perform moving through detection zone;
- Check output of "Alarm" notification on control panel and on
indicator if indication is enabled (indicator lights on 1 time for
4s at every movement).
Maintenance should be performed as follows:
- inspect integrity of the detector's body, reliability of contact
connections, detector fixation; clean detector from contamination.
c
a
b
Sales:
Controlex GmbH
Philosophenweg 31-33
47051 Duisburg, Germany
Phone: +49 (0) 203 / 393 91 188
Fax:
+49 (0) 203 / 393 91 189
GSM: +49 (0) 178 / 218 48 22
E-mail:
info@controlex.eu
Web:
www.controlex.eu
9 Labeling
On the label attached to the case are indicated:
- abbreviated marking of the detector;
- firmware version;
- month and year (last two digits) of manufacture;
- conformity mark (if certificate is available);
- barcode, duplicating text information
10 EC Conformity Declarations
This product is in conformity with the provisions of:
EMC 89/336/EEC
EN 61000-6-3:2005 Electromagnetic compatibility (EMC) - Part 6-3:
Generic standards - Emission standard for residential, commercial
and light-industrial environments
EN 50130-4/1995 + A1:1998 + A2:2003 + Corrig. 2003 Alarm systems
- Part 4: Electromagnetic compatibility - Product family standard: Im-
munity requirements for components of fire, intruder and social alarm
systems
EN 60950-1: 2001+A11:2004+Corrig.2004 Safety of information tech-
nology equipment
11 Recycling
Detector is not dangerous for life and health of people and is safe for
environment, after termination of service life it should be recycled
without special environment protective measures.
12 Warranty
12.1 Quality Management System meets provisions of ISO 9001-
2011.
12.2 The manufacturer guarantees the compliance of the detector
with technical requirements provided the transportation, storage,
mounting and operating rules and requirements are observed by user.
12.3 The storage warranty time is 5 years and 6 months from the date
of manufacturing.
12.4 The operation warranty time is 5 years from the date of opera-
tion start-up but no longer than 5 years 6 months from the date of
manufacturing.
12.5 The manufacturer commits to replace or repair the product dur-
ing the warranty period.
12.6 The warranty does not come into effect in following cases:
-operation manual is missing;
-mechanical damage of the product;
-repair of the detector by any other party except the manufacturer.
12.7 This warranty applies to the detector only, not to equipment of
third part manufacturers used with the detector jointly.
12.8 User should keep in mind that correctly installed signalling sys-
tem serves to decrease the risk of such events as larceny, robbery or
fire, but not to avoid them at all.
The manufacturer bear no responsibility for death, injury, dam-
age of property or any other kinds of accidental or premeditated
damages, based on user's statement that device failed to imple-
ment its function.
Warranty service and
technical support:
ТЕКО-TD
Prospekt Pobedy str. 19
420138 Kazan, Russia
Phone: +7 (843) 261-55-75
Fax:
+7 (843) 261-58-08
E-mail:
info@teko.biz
support@teko.biz
Web:
www.teko.biz
Made in Russia
4
5-av8_2_en
Advertisement
