Astra-5131 ver. C
(Curtain-type Lens)
Wireless Optic-Electronic
PIR Motion Detector
User Guide
Manufacturer:
ZAO NTC TEKO
Gafuri str. 71
420108 Kazan, Russia
+7(843) 528-03-69
export@teko.biz
www.teko.biz
Made in Russia
Rev. 5131sh-v2_2_instr_en
1 FUNCTION
The detector is intended for detection of an intrusion
into a secure space of an enclosed area, forming an
alarm notification and transmitting alarm signal to the
Security Hub via radio.
The detector provides measurement and transmission
via radio:
a) the residual capacity of the battery in operating
Mode 2 (see below) when the capacity value is 30,
20 and 10%.
b) ambient temperature (processed by Centrtal
Control Panel or Security Hub)
The transmission interval is 12 s (with Rtst plug
jumpered) or 60 s (with Rtst plug opened).
2
DETECTION ZONE
3 SPECIFICATIONS
Range of detectable
moving speed, m/sec
.............................. from 0.3 to 3.0
Wireless coverage range, m .................................... 100
Operating frequency range, MHz ............................ 433
Power supply voltage, V ......................... from 2.4 to 3.0
Dimensions, mm ........................................ 85 × 50 × 30
Operating Conditions
Temperature range, °С ........................ from - 20 to + 50
Relative air humidity, %....................... up to 98 at + 40 °С
Without moisture condensation
4 DELIVERY SET
Detector delivery set includes: bracket - 1 pc., dowel –
2 pcs., screw – 2 pcs., jumper – 4 pcs. (installed),
battery (CR 123A, 3V) - 1 pc., user guide – 1 copy.
5 OPERATING MODES
Mode
Plug
Mode 2* (compatible with
Security Hub)
Rmod
Mode 1
12 sec.
Test signal
transmission
Rtst
period**
60 sec.
Frequency 1 (433,42 MHz)
(compatible with Security
Lit
Hub)
Frequency 3 (434,42 MHz)
High detectability
PIR
Normal detectability
* Factory setting.
** For Mode 2 only
Setting operating mode of the detector, as well as
LED indication of notifications are provided within
10 minutes after battery insertion!
Jumper