ashak.bk : ashak-3.fb4 Page 28 Wednesday, July 15, 1998 6:41 PM
Pre-Boot Checks
3 Troubleshooting Your HP PC Workstation
Using HP MaxiLife to Diagnose Problems
Using HP MaxiLife to Diagnose Problems
Your HP LCD can help you to diagnose problems with your PC
Workstation, even when you are unable to get your system and monitor
working properly.
When you press your PC Workstation's on/off button, HP MaxiLife will
check your system before it initiates the start-up sequence. You will see
one of the following screens on the LCD as these checks progress:
Error!
CPU Socket
Check power supply and
Check that processor is correctly
inserted in CPU slot.
power cable connections.
Error!
No RAM
Check that graphics card
Check memory installation
is installed correctly.
Error!
BIOS
Check that RAM types
Flash new BIOS or start
system using crisis switch
installed are compatible.
(system board switch 10).
28
English
Error!
Power supply
Check processor installation.
Error!
No Video
Check system board.
HP KAYAK XA
Error!
RAM type
No errors occurred during pre-
boot. POST is initiated.
Error!
Power CPU
Error!
Board PLL