Connecting To A Network - HP Kayak XA User Manual

Hp kayak xa: users guide
Hide thumbs Also See for Kayak XA:
Table of Contents

Advertisement

ashak.bk : ashak-1.fb4 Page 4 Wednesday, July 15, 1998 6:41 PM
1 Setting Up and Using Your PC Workstation

Connecting to a Network

Connecting to a Network
Your PC Workstation may be equipped with a 10BT/100TX LAN
interface adapter.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations
and automatically detects which network type is being used.
1 Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2 Attach the other end of the LAN cable to a hub (or into a wall socket
that is connected to a hub).
Let your Network Administrator know that you are connecting your
PC Workstation to the network.
For further instructions on configuring your network connection,
refer to the Upgrade and Configuration Guide available on HP's
Web site.
Refer also to the online Network Administrator's Guide (available
on HP's Web site) for further instructions on setting up your PC
Workstation for a LAN connection.
4
English
The board shown here is a
combined LAN/SCSI board.
Some models do not have
the SCSI option.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kayak xa05

Table of Contents