If Your Pc Workstation Does Not Start Properly - HP Kayak XA User Manual

ashak.bk : ashak-3.fb4 Page 34 Wednesday, July 15, 1998 6:41 PM
Check External Items
Check Internal Items
3 Troubleshooting Your HP PC Workstation

If Your PC Workstation Does Not Start Properly

If Your PC Workstation Does Not Start Properly
Display is Blank and There Are No Error Messages
If your display is blank and there are no error messages when you turn
on your PC Workstation, follow this procedure:
1 Check the LCD screen (refer to "Using HP MaxiLife to Diagnose
Problems" on page 28).
2 Check external items.
3 Check internal items.
Be sure the following external items are functioning properly:
Check that the computer and display are turned on. (The power light
•
should be illuminated.)
Check the display's contrast and brightness settings.
•
Make sure that all cables and power cords are firmly plugged in.
•
Make sure the power outlet is working.
•
If the PC Workstation still does not start properly, follow this procedure
to check the internal items:
1 Turn off the display, the computer, and all external devices.
2 Unplug all power cords and cables, noting their positions. Disconnect
the PC Workstation from any telecommunications network or LAN.
3 Remove the cover and check the following items:
LCD Error
Messages
- Check all internal cables.
- Check that the status panel is correctly
connected to the system board
Power CPU Check that the processor is correctly
installed.
34 English
Action
Ensure they are correctly attached and
firmly in place.
Ensure that both connectors are
correctly attached and firmly in place.
Ensure it is firmly in place.
Reference