Installation; Location - Sandstrom SDWTTB14E Installation Instructions Manual

Installation

INSTALLATION

Location

When selecting a position for your dishwasher
you should make sure the installation surface
is flat and firm, and the room is well ventilated.
Avoid locating your dishwasher near a heat
source, e.g. cooker, boiler or radiator. Extreme
cold ambient temperatures may also cause
the appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoor installation.
Do not drape the dishwasher with any
covering. When installing, ensure that free
space is left at the sides.
All parts removed must be saved to do the
reinstallation in the future. Ensure the dishwasher
is unplugged and empty. We recommend that 2
people handle the dishwasher during installation.
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
The supplied door template also contains
installation steps which will assist installation.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement for
servicing when required.
The dimension of the dishwasher is 550(W)
x 500(D) X 445(H) in mm. The figure outlines
the minimum dimensions required to
accommodate the table top dishwasher.
Protect plastic parts and cables from high
temperatures.
50mm or
150mm or more
more
50mm or more
500mm
445mm
150mm or more
GB
19