Start Single Sweep; Trigger Subsystem; Set Trigger Type; Edge Trigger Of External Trigger - ADInstruments DSA2016 User Manual

Turn on or off the function of continuous sweep. When continuous sweep is turned
off, it enters into single sweep status.
Query the status of continuous sweep function.
Return format
Query and return the ON or OFF status of continuous sweep function as the format
of characters.

5.8.2 Start Single Sweep

Command format:
INITiate:IMMediate
Function description:
This command is to start single sweep. Pay attention that this command is only valid
after you set the sweep mode as single sweep in advance.

5.9 TRIGger Subsystem

5.9.1 Set Trigger Type

Command format:
TRIGger:SEQuence:SOURce IMMdeiate|VIDeo|EXTernal
TRIGger:SEQuence:SOURce?
Function description:
Set trigger type
Query trigger type
Parameter specification
IMMediate：Free trigger
VIDeo：Video trigger
EXTernal：External trigger
Return format
Query and reture IMMdeiate, VIDeo or EXTernal as the format of characters. !
!

5.9.2 Edge Trigger of External Trigger

Command format:
TRIGger:SEQuence:EXTernal:SLOPe POSitive|NEGative
TRIGger:SEQuence:EXTernal:SLOPe?
Function description:
Set edge trigger of external trigger.
Query edge trigger of external trigger.
Parameter specification
POSitive：Rising edge
NEGative：Falling edge
Return format