ADInstruments DSA2016 User Manual page 5

General Safety Summary
Please review the following safety precautions carefully before putting the instrument into operation
so as to avoid any personal injuries or damages to the instrument and any product connected to
it. To prevent potential hazards, please use the instrument only specified by this manual.
u The reparation could only be executed by professional authorized personnel.
u Avoid fire and personal injury.
u Use Proper Power Cord.
u Ground the Instrument.
The instrument is grounded through the Protective Earth lead of the power cord. To avoid
electric shock, it is essential to connect the earth terminal of power cord to the Protective Earth
terminal before any inputs or outputs.
u Observe all Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on the instrument and check
your manual for more information about ratings before connecting.
u Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
u Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is powered.
u Do Not Operate With Suspected Failures.
If you suspect damage occurs to the instrument, have it inspected by qualified service
personnel before further operations. Any maintenance, adjustment or replacement especially
to circuits or accessories must be performed by AD INSTRUMENTS authorized personnel.
u Keep Well Ventilated.
u Do Not Operate in Wet Conditions.
u Do Not Operate in an Explosive Atmosphere.
u Keep Product Surfaces Clean and Dry.