Residual Risks; Additional Safety Instructions For Lasers; Safety Of Others - Stanley FATMAX FME721-QS Manual

ENGLISH
Raise the blade from the table insert in the work piece
u
prior to releasing the on/of switch.
Do not wedge anything against the fan to hold the motor
u
shaft.
The blade guard on your saw will automatically raise when
u
the arm is brought down; it will lower over the blade when
the arm is raised. The guard can be raised by hand when
installing or removing saw blades or for inspection of the
saw. Never raise the blade guard manually unless the
machine is switched off.
Check periodically that the motor air slots are clean and
u
free of chips.
Do not work with material containing asbestos. Asbestos
u
is considered to be carcinogenic.
Never make the warning signs on the power tool unrecog-
u
nizable.
Never stand on the power tool. Serious injuries could
u
occur when the power tool tips over or when coming in
contact with the saw blade.
Do not take hold of the saw blade after working before it
u
has cooled. The saw blade becomes very hot while work-
ing.
Advance the saw blade against the work piece only when
u
it is switched on. Otherwise, the danger of kick-back exists
when the saw blade catches in the work piece.
The intended use is described in this instruction manual.
u
The use of any accessory or attachment or performance
of any operation with this tool other than those recom-
mended in this instruction manual may present a risk of
personal injury and/or damage to property.
Never place hands near cutting area. Keep hands outside
u
the "No Hands Zone" which includes entire table and is
labelled by "No Hands" symbols.
To avoid injury from materials being thrown, unplug the
u
saw to avoid accidental starting, and then remove small
materials.
Before use and after any maintenance the blade guard
u
must be checked to ensure proper function. This test must
be performed with the saw switched off and unplugged.
The arm must be raised and lowered to ensure the guard
covers the blade and the blade does not contact the
guard. If the guard fails to operate correctly, have your
power tool serviced by a qualified repair agent. Call Stan-
ley Fat Max customer services for you nearest service
agent.

Residual risks.

The following risks are inherent to the use of saws:
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving parts.
u
Impairment of hearing.
u
12
(Original instructions)
Risk of accidents caused by the uncovered parts of the
u
rotating saw blade.
Risk of injury when changing any parts, blades or acces-
u
sories.
Risk of squeezing fingers when opening the guards.
u
Health hazards caused by breathing dust developed when
u
sawing wood, especially oak, beech and MDF.
Injuries caused by prolonged use of a tool. When using
u
any tool for prolonged periods ensure you take regular
breaks.

Additional safety instructions for lasers

This laser complies with class ll according to IEC 60825-
1:2007. Do not replace a laser diode with a different type. If
the laser is damaged, have the laser repaired by an author-
ised repair agent. Do not use the laser for any purpose other
than projecting laser lines.
Never look into the laser beam directly and intentionally.
u
Do not use optical tools to view the laser beam.
u
Do not set up the tool where the laser beam can cross any
u
person at head height.
Do not let children come near the laser.
u
Warning! Avoid direct eye contact. Laser radiated when laser
guide is turned on. Avoid direct eye contact. Always unplug the
mitre saw from power source before making any adjustment.
A laser pointer is not a toy and should not come into
u
hands of children. Misuse of this appliance can lead to
irreparable eye injuries.
Any adjustment to increase the laser power is forbidden.
u
Any liability for damages as a result of not following these
safety instructions will be rejected.
When using the laser pointer, do not point the laser beam
u
towards people and/or reflecting surfaces. Even a laser
beam of lower intensity may cause eye damage. There-
fore, do not look directly into the laser beam.
The laser pointer includes no servicing components. Do
u
not open the housing otherwise the guarantee is void.

Safety of others

This saw is not intended for use by persons (including
u
children) with reduced physical, sensory or mental capa-
bilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children should be supermaterial clampd to ensure that
u
they do not play with the appliance.
Vibration
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured
in accordance with a standard test method provided by
EN 60745 and may be used for comparing one tool with
another.