Stanley FatMax FME700 Original Instructions Manual

Stanley FatMax FME700 Original Instructions Manual

Chop saw
Hide thumbs Also See for FatMax FME700:

Advertisement

FME700

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FatMax FME700 and is the answer not in the manual?

Questions and answers

Summary of Contents for Stanley FatMax FME700

  • Page 1 FME700...
  • Page 4: Intended Use

    6. Do not force the tool It will do the job better and safer at the rate for which it was Your Stanley Fat Max Chop Saw has been designed for the intended. cutting of variously shaped steel materials. This tool is intended for professional and private, non professional users.
  • Page 5 (Original instructions) ENGLISH 16. Remove adjusting keys and wrenches Never reach in the back of the cutting disc. Always check that adjusting keys and wrenches are removed Always position the tool on a flat, stable surface that is from the tool before operating the tool. well maintained and free of loose materials, e.g.
  • Page 6: Warning Symbols

    (U). If the supply cord is damaged, it must be replaced by the Check that the spacer (R) is in place against the flange. manufacturer or an authorised Stanley Fat Max Service Centre in order to avoid a hazard.
  • Page 7: Cutting Capacity

    (Original instructions) ENGLISH Replace the cutting disc (J). Make sure that the new disc Setting the clamping position (fig. 5) is placed onto the spacer (R) in the correct rotational The clamping position can be set to match the cutting disc. direction.
  • Page 8: Prior To Operation

    4" x 7-5/8" and pull off the lock chain (A). (115mm x 130mm) 3" x 7-3/8" Maintenance (115mm x 130mm) Your Stanley Fat Max corded/cordless appliance/tool has A= 4-1/2" A = 3-13/16" 4-1/2" x 3-13/16" A = 3-13/16" Cutting been designed to operate over a long period of time with a...
  • Page 9: Protecting The Environment

    Rectangular 115 x 130 Angular Should you find one day that your Stanley Fat Max product 137 x 137 needs replacement, or if it is of no further use to you, do not Cross Cutting Capacity at 45 dispose of it with household waste.
  • Page 10: Ec Declaration Of Conformity

    Stanley Fat Max catalogue or contact your local Stanley Europe, Egide Walschaertsstraat14-18, Stanley office at the address indicated in this manual. A list of 2800 Mechelen, Belgium authorised Stanley Fat Max repair agents and full details of 28/08/2012 our after sales service is available on the internet at:www.
  • Page 12 United Kingdom Stanley Fat Max Tel. 01753 511234 210 Bath Road Fax 01753 572112 Slough, Berkshire SL1 3YD www.stanleytools.co.uk REV- 08/2012...

This manual is also suitable for:

Fatmax fme700

Table of Contents