If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Stanley FatMax hand-held saw has been designed for protected supply. Use of an RCD reduces the risk of sawing wood, plastics and sheet metal. This tool is intended electric shock.
ENGLISH (Original instructions) When cutting pipe or conduit, make sure that they are d. Store idle power tools out of the reach of children and free from water, electrical wiring, etc. do not allow persons unfamiliar with the power tool or Do not touch the workpiece or the blade immediately these instructions to operate the power tool.
If the supply cord is damaged, it must be replaced by the Slide the shoe (1) to the desired position manufacturer or an authorised Stanley FaxMax Service Warning! To prevent loss of control, never use tool without Centre in order to avoid a hazard.
The performance of your tool depends on the accessory used. Holding the tool with both hands, work with the shoe (1) pressed against the workpiece. Stanley FaxMax accessories are engineered to high quality standards and designed to enhance the performance of your Flush cutting tool.
Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Stanley FaxMax product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product avail- able for separate collection.
Page 8
Australia & New Zealand Stanley Black & Decker 82 Taryn Drive, Epping, VIC 3076 Australia Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 90610907 05/14...
Need help?
Do you have a question about the FatMax FME365 and is the answer not in the manual?
Questions and answers