Appendix A: Print Options; Where To Set Print Options - Canon ColorPASS-Z5000 Printing Manual

A
A-1 Print Options
Appendix A:
Print Options
Print options give you access to all the special features of your copier and ColorPASS.
Print options can be specified in several places—in ColorPASS Setup, from the
printing application, from Fiery Downloader, from ColorWise Pro Tools, from the
Command WorkStation, from Fiery WebSpooler, and from Fiery Spooler. The table in
this appendix briefly describes each print option, gives its default setting, and provides
information on any constraints or requirements in effect.

Where to set print options

• From the Control Panel
Some settings are specified during Setup by the administrator. For information on
the current default server settings, print a Configuration page and check with the
administrator or the operator.
• From applications
With the PostScript printer drivers, you can specify job settings when you print a
job. See Chapter 1, "Printing from Windows Computers" and Chapter 2, "Printing
from Mac OS Computers" for information about specifying job settings from
applications.
• From Fiery Downloader
Only a few settings—Copies, Page Range (for PDF files only), and Brightness (for
PostScript and EPS files only)—can be specified when printing jobs with Fiery
Downloader. To change options in Fiery Downloader, select a job in the Files to be
Downloaded (Windows) or Files to Download (Mac OS) list and click Options. For
more information, see Chapter 5, "Downloading Files and Fonts."
• From ColorWise Pro Tools
You can set the default RGB Source Profile, CMYK Simulation Profile, Output
Profile, CMYK Simulation Method, and RGB Separation settings. See the Color
Guide for more information on using ColorWise Pro Tools.