Access Configure From Command Workstation; Access Configure From Webtools; Print The Configuration Page - Canon imagePRESS Server G200 Configuration And Setup

There are two methods of access:
•
In Device Center, select General Info, then click Configure in the lower right corner.
•
From the menu bar, select Server > Configure. If the wizard is not completed, a choice is provided to access
either the wizard or the Configure tool.
•
The Configure tool in WebTools:
To access, click the Configure tab.
In the Configure tool (referred to as Configure), you can find settings quickly by typing keywords into the Search bar
at the top.
You can also view the configuration settings as follows:
•
By saving the configuration settings as a file (see Configure Help).
•
By printing the configuration settings (see
For a description of all the configuration settings, see Configure Help.

Access Configure from Command WorkStation

1 Log into Command WorkStation as Administrator.
2 Access Configure through either of the following methods:
•
Select Server > Configure.
•
In Device Center, select General Info, click Configure in the lower right corner.
3 If the Fiery Setup dialog box displays, click Configure.

Access Configure from WebTools

1 Open an Internet browser and type the IP address of the imagePRESS Server.
2 In WebTools, click the Configure tab.
Note: If a message about an untrusted connection appears or you are asked whether you want to proceed, you
can safely ignore the message and proceed by clicking Continue to website.
3 Log on with Administrator privileges.

Print the Configuration page

Configuration and Setup
Accessing the configuration settings
on page 28).
27