Canon ColorPASS-Z5000 Printing Manual page 96

A
A-6 Print Options
Option and settings:
(Default setting is underlined)
Image Shift
-2.5 mm/-2 mm/-1.5 mm/-1 mm/
-0.5 mm/0/0.5 mm/1 mm/1.5 mm/
2 mm/2.5 mm
Instructions
Landscape
No/Yes
Manual Face
Second side/Off
Media Type
Plain Paper/Transparency/
Heavy Paper/Extra Heavy Paper/Special
Paper 1/Special Paper 2/Thin Paper/
Auto Select
Notes
Description:
Selecting a value adjusts an image for
duplex printing by shifting the image
horizontally, in the direction of paper
travel, relative to the leading edge.
Enter instructions to the operator about
the job.
Specify if you will be printing on
landscape-oriented paper.
Use this option for two-sided printing.
Select to print the second
Second side
side of your job.
Select if you will be printing
Transparency
on transparencies.
Enter special information about the job.
Requirements, constraints,
and information:
The Instructions field has a 128-character
limit.
This option is available from Mac OS,
Windows NT 4.0, and Windows 2000
drivers only. For Windows 95/98/Me
drivers, use the Orientation option.
The Landscape option can also be
specified from Fiery WebSpooler, Fiery
Spooler, or Command WorkStation.
Paper Source must be set to
SB (Stack
, or
Bypass) SB-Size Set at Copier
this option.
If Manual Face is set to
Second side
following options must be set to Off:
Duplex, Slip Sheet, and Transparency
Interleaving.
Also, Media Type cannot be set to
, or .
Transparency Auto Select
For more information, see page A-18.
The Notes field has a 31-character limit.
to use
, the