Scanning From The Copier; Fiery Scan Color Conversion Settings; Using Fiery Scan - Canon ColorPASS-Z5000 Printing Manual

4

4-11 Scanning from the copier

Scanning from the copier
With the Fiery Scan plug-in module for Photoshop, you can scan an image from the
copier glass directly into Photoshop on your computer.
Additionally, with the Fiery Scan plug-in module, you can scan an image or document
directly into the following applications:
• Adobe Photoshop 5.0 LE (Limited Edition)
• Adobe Acrobat 4.0 or 4.05 (Windows only)
• Imaging for Windows 98 (Windows only)
• CanoBureau Workgroup series (V2.1 or later)
The following requirements and constraints apply:
• The Fiery Scan plug-in must be installed as described in Getting Started.
• In Photoshop 5.x's RGB Setup, use the EFIRGB ICC (Mac OS) or EFIRGB.icm
(Windows) settings. See Getting Started for information on loading this file.

Fiery Scan color conversion settings

Fiery Scan offers two color conversion choices for scanned data:
•
Calibrated RGB
Rendering Styles (CRDs) or ICC profiles, as well as for viewing on the monitor.
•
Match Copy
copy of the original made with the copier.

Using Fiery Scan

With Fiery Scan, you first create a prescan of the image; then you can select part, or all,
of the prescan for final scanning.
The Windows and Mac OS versions of Fiery Scan are fundamentally the
N :
OTE
same; differences are noted in this section. Where both windows or dialog boxes are
illustrated, the Windows version comes first, followed by the Mac OS version.
creates an RGB scan optimized for printing with ColorPASS
creates a CMYK scan that, when printed on the ColorPASS, looks like a