Canon ColorPASS-Z5000 Printing Manual page 101

A
A-11 Print Options
Option and settings:
(Default setting is underlined)
Rotate 180
Yes/No
Save Fast Reprint
Off/On
Sharpness
Softer/Normal/Sharper/None
Slip Sheet
On/Off
Description:
Specify if you want to rotate the pages of
your job 180 degrees.
Specify whether or not to save a job's
raster data to disk after printing, so the
data will be available later for reprinting
(without reRIPping).
Change the Sharpness setting to alter the
results of a print. Select
Sharper
edges appear more defined; select
to make edges less defined.
Specify whether to insert a slip sheet
between copies of multiple-copy jobs.
Requirements, constraints,
and information:
This option is only available from
Mac OS and Windows NT 4.0. For
Windows 95/98/Me, use the
Orientation option.
The Rotate 180 option can also be
specified from Fiery WebSpooler, Fiery
Spooler, or Command WorkStation.
Depending on the application you are
using, your landscape job may print with
the incorrect orientation; if this occurs, or
if you select a Stapler Mode (other than
) and the staple is inserted in the
Off
wrong place, select
With Save Fast Reprint set to
option settings remain with the saved
raster data each time the job is reprinted.
To print the job with new print option
settings, you must remove raster and
reRIP the job.
to make
Softer
If this option is set to
settings must be applied:
Sort Mode set to
Off
Stapler Mode set to
Media Type to
Plain Paper, Transparency,
or
Special Paper
If this option is set to
options cannot be applied:
Duplex to
Manual
Paper Size to
12x18, A5, 305x440,
or
Statement, Custom Paper Size
Paper Source to
SB (Stack Bypass)
SB-Size Set at Copier
Manual Face set to
.
Yes
, all print
On
, the following
On
or
Collate
Off
, the following
On
or
Second Side