Canon ColorPASS-Z5000 Printing Manual page 98

A
A-8 Print Options
Option and settings:
(Default setting is underlined)
Page Order
Forward/Reverse
Page Range
All/Even/Odd
Paper Size
Letter/A4/Legal/11x17/A3/Letter-R/
A4-R/12x18/305x440/A5/A5-R/
Statement/Statement-R/
Custom page 1/Custom page 2/
Custom page 3
Description:
Select to print the pages of your
Forward
job from first to last.
Select to print the pages of your
Reverse
job from last to first.
Specify which pages of the document to
print. To print a contiguous page range,
specify the first and last page numbers of
the range separated by a hyphen. To print
non-contiguous pages, specify the page
numbers using commas as separators.
Specify the size of the paper on which to
print the document.
Requirements, constraints,
and information:
N : If you set Page Order to
OTE
and print a job with more than 1000
pages, or a job that is too large to be saved
to the ColorPASS's memory and disk
(based on currently available space), then
the job may print in sections that have to
be manually rearranged after printing.
For example, if you print a 1500-page
document in reverse order, the
ColorPASS might divide the job into two
portions, first printing page 1000 to page
1, and then page 1500 to page 1001.
If this option is set to
Reverse
Compression must be set to
On
This option is available only as an
override from Fiery WebSpooler, Fiery
Spooler, and Command WorkStation.
See page A-19 for more information.
If you select , , or
12x18 305x440
Media Type must be set to
Plain Paper
and Paper Source must be set to
or
Bypass) SB-Size Set at Copier
If the Paper Size is set to
12x18
, , , or
A5 Statement Statement-R
the following options cannot
Paper Size
be set:
Sorter Mode to or
Sort Group
Duplex to or
Top-Top Top-Bottom
If you select , the Paper
Statement-R
Source option cannot be set to
or .
Deck-J1 Paper Deck-K1
Reverse
,
.
A5,
SB (Stack
.
, ,
305x440
Custom
Paper