Canon ColorPASS-Z5000 Printing Manual page 95

A
A-5 Print Options
Option and settings:
(Default setting is underlined)
Copier Mode
Photo/Character/Auto2/Auto1
Copies
1-999 (Windows 95/98/Me and
Mac OS),
1-9999 (Windows NT 4.0 and
Windows 2000)
Create Master
None/1-15
Duplex
Off/Top-Top/Top-Bottom/Manual
Finishing
Bypass/Shift stack/Booklet with
Staple/Booklet with Staple &
Trim/Booklet/Booklet with Trim
Description:
Specific Copier Modes produce optimum
results with certain files. Choose the
Copier Mode best suited for your job:
works best if the file is a
Photo
photograph.
works best with text or data
Character
with thin lines.
Select if the file is a combination of
Auto1
text, graphics, and images.
Auto1
print text at 400dpi and graphics and
images at 200 or 266dpi.
Select if the file is a combination of
Auto2
text, graphics, and images.
Auto2
print text and graphics at 400dpi and
images at 200 or 266dpi.
Specify the number of copies of the job to
print.
To create a FreeForm master from this
job, specify a number to assign to the
FreeForm master file.
Specify whether the job should print
single-sided or double-sided (duplex), by
specifying the orientation of printed
images. Choose Manual to print from
stack bypass.
Specify how you want to finish your job. The Finisher option must be installed to
Requirements, constraints,
and information:
will
will
Do not enter a value greater than the
maximum specified in the printer driver
you are using.
See page 4-1 for more information.
This option is selectable only if FreeForm
is available.
For more information on duplex
printing, see page A-16.
If this option is set to
Mode cannot be set to
this option is set to
cannot be set to
Transparency
.
Select
use all settings other than Bypass.
, Sorter
Manual
or . If
Sort Group
, Media Type
Manual
, or
Auto