Canon ColorPASS-Z5000 Printing Manual page 107

A
A-17 Print Options
For jobs imposed using Fiery Imposition, do not use Top-Bottom duplexing.
N :
OTE
3. Print the job.
The following table shows how the Duplex settings correspond to printed output:
Portrait
Landscape
You can use the Manual Duplex feature to get Top-Top or Top-Bottom output
depending on how you flip the pages after the first side prints.
T
O PRINT DUPLEX PAGES MANUALLY
1. Choose Print in your application, and locate the Duplex print option.
The location of ColorPASS print options varies, depending on the printer driver you
are using.
2. Set the Duplex option to Manual.
3. Print the job.
Make sure there is paper in the SB (Stack Bypass).
4. After the first side prints, remove the pages from the output tray and flip them as
shown below.
Top-Top
1 2
1 2
:
Top-Bottom
2
1
2
1