Regular Printing Is Selected, But A Roll Is Loaded; Paper Jam; Paper Is Crooked; Push The Release Lever Back - Canon imagePROGRAF iPF760 Basic Manual

Regular printing is selected, but a roll is loaded.

You have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet is
loaded.
Regular printing is selected, but a roll is loaded. Regular printing is selected, but a roll is loaded.
Cause
A print job for printing on
sheets was sent when a
roll is loaded.

Paper jam

Paper jam

"Push the release lever back."

Cause
A paper jam occur- 1.
red in the printer
during printing.
2.
3.
4.
"Manually rewind the roll all the way and press OK."
Cause
A paper jam occurred
when advancing the
paper.

Paper is crooked.

Paper is crooked.
Paper loaded crooked was detected when the paper was advanced.
114
Cause
(See "Loading and Printing on Rolls.")
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have specified in the
printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Push the Release Lever back and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Load the paper.
Pull the Release Lever forward.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
1.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2.
Load the paper.
3.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
Cause
Corrective Action
Corrective Action
→P.15
→User's Guide
Corrective Action
→P.83
→P.86
→P.12
→P.18
Corrective Action
→P.12
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it parallel to the orange
Paper Alignment Line.
3.
Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
→User's Guide
Corrective Action
→P.12
Basic Guide
iPF760