Printing Does Not Start - Canon imagePROGRAF iPF760 Basic Manual

iPF760

Printing does not start

Printing does not start
The Data lamp on the Control Panel does not light up ................................................................................. 91
The printer does not respond even if print jobs are sent ............................................................................. 91
Ink Filling.. is displayed ................................................................................................................................ 91
The display screen indicates Agitating ........................................................................................................ 91
The Data lamp on the Control Panel does not light up The Data lamp on the Control Panel does not light up
Cause
The printer is not on.
The target printer was not
selected when printing.
The print job is paused.
The printer does not respond even if print jobs are sent The printer does not respond even if print jobs are sent
Cause
In the Control Panel menu, Pause Print is On.
In the Control Panel menu, Use USB or Use Ethernet is set to Off.
Ink Filling.. is displayed
Ink Filling.. is displayed
Cause
The printer was forced off during opera-
tion.
The display screen indicates Agitating The display screen indicates Agitating
Cause
Ink agitation is in pro- Please wait until ink agitation is finished.
gress. The time for agitation varies depending on how long the printer has been off. (Between about 30 seconds and
two minutes.)
Basic Guide
Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing
again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the list of Printer, and try
printing again.
In Windows, restart the print job as follows.
1.
Select the printer icon in the Printers and Faxes (or Printers) window.
2.
Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1.
Click Print & Fax. (This is identified as Printer Setup Utility or Print Center in other versions of Mac
OS X.)
2.
Select the printer, and then Resume Printer (or Start Jobs) in the Printers menu to restart the print job.
Wait until the system has been filled with ink. This process may take about seven and a half
minutes.
The Data lamp on the Control Panel does not light up
Corrective Action
Corrective Action
Set Pause Print to Off.
(See "Pausing Printing.") →User's Guide
Set Use USB or Use Ethernet to On.
(See "Menu Settings.") →User's Guide
Corrective Action
Corrective Action
91